In most studios, payment must be made before services are rendered. It is up to each studio to decide which methods of payment they accept. Whatever method you pay with, make sure they give you a receipt.
After your paperwork is filled out, you will be seated in the tattoo chair. Sometimes this is in an open work area, and sometimes a private room, depending on the location of your tattoo. If you are shy and don't want others to watch, you can request a private room, but be sure you have done this in advance. A lot of studios use dentist-style chairs, some use regular table chairs, and some use benches. Your artist will do his or her best to make you comfortable for the tattoo you have chosen.
Now it's time for the preparation. The area of your body you have chosen for your tattoo will be cleaned, usually with rubbing alcohol. Then, any hair will be removed from the area by shaving it with a new disposable razor which will be discarded after being used. Even the finest of hairs can get in the way and cause problems, so this is a crucial step, even if you can't see any hairs.
Then, the area will be cleaned again to make sure it is smooth and ready for the transfer. Most tattoo studios use a machine called a thermal imager to make their stencils. This saves on literally hours of tracing time by simply inserting your tattoo design into the machine, and it transfers it onto a special thermal paper in seconds. Once your stencil is ready, it's time to create the transfer onto your skin.
Some artists will use soap or water to moisten the skin, and some will use stick deodorant. These aid in making the design transfer better and darker onto your skin. When the paper is pulled away from your skin, it will leave you with a purple-ish blue likeness of your future tattoo.
Once you approve of how everything looks, you're ready to go. It is at this time that your artist will start preparing their tattoo machine. The inks will be placed in little tiny cups called ink caps, and the needles and tubes will be removed from their sterile pouches and placed in the machine.
Clean, distilled water will be poured into a cup for cleaning the needles during the tattoo process and to change from one color to the next. A little ointment will be placed over your transfer design for a few reasons. One is that it helps keep the transfer on longer without accidentally rubbing it off, and it also helps the needle to slide along the skin more smoothly, which is certainly going to be more comfortable to you.
After the ointment is applied, it is time for the first line. If you're nervous, don't hold your breath. Take a nice, slow, deep breath and try to relax. The first minute or so will be the roughest. If not, check your local printing shop. Prepare your skin the same way as before and position the paper on your skin.
Smooth out the sheet and apply pressure to make sure that the image transfers properly. When you pull back the thermal paper, you should see the full drawing represented on your skin. Q: Can you use a regular printer for tattoo transfer paper? Q: Where can you buy a transfer paper? A: You can find tattoo transfer paper on Amazon, Walmart, and possibly local tattoo shops.
Needing to remove a tattoo is the last thing anyone ever wants to do. Using tattoo transfer paper along with the processes mentioned above is the closest you can come to getting a good look at the design on your skin before you give your artist the green light. As an Amazon Associate I earn from qualifying purchases.
This type of stencil paper is normally more cost effective and easier to re-do if you make a mistake. The availability of different colors can also make them easier to see on different skin tones. Thermal transfer papers typically contain four layers. First is a white layer for the design to be transferred onto. This is protected by a milky thin layer which is normally thrown away. It also has an ink layer, which is usually purple. Finally there is a bottom yellow layer which hold the sheets in place.
Create your tattoo design in pencil on a regular sheet of white paper before sliding the design between the ink layer and the bottom yellow sheet. You then place the whole set of papers through a thermogenic transfer maker. Apply the included adhesive to your image. The pack of printable tattoo paper will come with an adhesive sheet.
Then trim around the edges of your image, cutting the adhesive sheet down as closely to the outline of the image as possible. Peel the clear plastic film off the image. With the adhesive sheet on the image, it will now have the layer of adhesive and then a layer of clear plastic film over. Peel this clear film back to expose the sticky layer of adhesive on top of the image.
Place the image picture-side down on your craft. Before you stick it to your object, make sure you have it lined up the way you want it. Moisten the back of the image with a wet towel. You can use a cotton towel or paper towel for this step, but a cotton towel works best.
Press the damp towel down on the back of the image gently, until the whole thing is moistened. Peel the backing paper off gently. Start at a corner of the image, and gently pull the backing paper back.
As the paper comes back, the image should stay on the surface of your craft. If you notice that the image is also pulling away, put the backing paper back down and remoisten that area.
Seal the image with a glaze spray. This type of spray is available at most craft stores. It will seal the image and prevent any of the ink from flaking off in the future.
Let the glaze fully dry before you move your craft — about 30 minutes. Include your email address to get a message when this question is answered. By using this service, some information may be shared with YouTube. Related wikiHows How to. How to. More References 5. About This Article. Co-authored by:.
0コメント